Turn off the water and go look for any sign of water spraying. You can activate all zones manually from the controller to confirm the process of each station valve.
Your sprinkler system is now primed for its first watering of spring.
How to turn on sprinkler system in spring.
A quarter turn or so is all you will need.
If the water does not stop running more than likely there is a valve still open on the outside of the house on or around the backflow device.
Begin the process by filling the main line of the irrigation system located between the water source and the zone valves.
If these valves are opened too quickly sprinkler main lines are subjected to high surge pressures uncontrolled flow and water hammer which may cause them to crack or burst.
How to turn your sprinkler system on duration.
Protect your lawn from summer heat without a sprinkler system.
Starting up your sprinkler system in the spring de winterize.
Sprinkler stations you should observe each of the sprinklers and if any leakage occurs then mend it.
You are now ready to turn in the water.
This is a step by step video on how to turn on an irrigation system.
Now youre ready to turn on the water to the sprinkler system.
How to turn your sprinkler system on duration.
The smashed sprinkler heads should be removed.
Turn the valve handle slowly to fill the lines between there and the backflow preventer.
Turn the main irrigation supply line on slowly.
As soon as the water flowing out looks clear close the valve and screw the nozzle back into place.
With the sprinkler heads removed any dirt and debris trapped in the line should be flushing out.
Take your time and remember that the water has to travel the entire length of the main line.
Check your irrigation zones.
You should hear water running for a few seconds then stop.
Locate the main shutoff valv e.
Open the system main water valve slowly to allow pipes to fill with water gradually.
If you dont know where your systems shutoff valve is located look in your basement or crawlspace for piping.
This is a copper or plastic valve assembly.
The valve to turn on the water is usually near your water meter inside the house.
Locate the vacuum breaker.
Always remember to fill your sprinkler lines slowly.
You can use the standard screw or timer to turn on the sprinklers.
Look for the vacuum breaker above ground usually near the house.
Slowly open the shutoff valve that controls the water supply to the entire system.
Starting up your sprinkler system in the spring de winterize.
Weed control richardson I have read all the comments and suggestions posted by the visitors for this article are very fine,We will wait for your next article so only.Thanks!
ReplyDeleteSprinkler repair plano This particular is usually apparently essential and moreover outstanding truth along with for sure fair-minded and moreover admittedly useful My business is looking to find in advance designed for this specific useful stuffs…
ReplyDelete